Seattle HVAC: Sunpentown SF-610 Evaporative Air Cooler with Ionizer

Sunpentown SF-610 Evaporative Air Cooler with Ionizer

Product Characteristics

Versatile lightweight air cooler can also be put to use as a fan or humidifier
Uses significantly less power than an air conditioner
120 volts 60 watts
Remote control included
12 x 9.45 x 28.four inches 17 pounds restricted 1-year warranty

Product Details

Product Dimensions: 14.5 x 31 x 12 inches ; 21 pounds
Shipping Weight: 21.2 pounds (View shipping rates and policies)
Shipping: Currently, item can be shipped only within the U.S.
Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
ASIN: B000G7UOXK
Item model number: SF-610

By : Sunpentown
List Price : ~~$111.00~~
Price : $92.75
You Save : $18.25 (16%)

Item Description

Size: 12L x 9.5W x 28.35H inches
Amazon.com Product Description
Loosen up in refreshing cool air in any room of your property or workplace. The SPT Evaporative Air Cooler rolls very easily from space to area, shooting a stream of cool air utilizing oscillating louvers that evenly distribute the air. It sucks air by means of a water-saturated wick. As the air flows by means of the wick, some water evaporates into the air, consuming the heat in the air. An air stream is then blown out the front of the unit and is significantly cooler than the area temperature. Because the 3-speed Air Cooler is not an air conditioner, it utilizes much less power. You can also use it as a humidifier or a fan and nevertheless get the ionic air purifier’s cleaning advantages. Use the remote control to transform settings. Perfect utilized in dry climates or open spaces. Leave the window or door open when humidity or temperature rises in the area. Add as a lot ice as attainable, and set the unit close to you for best effect. Runs highly quietly. ten-liter water tank. 120 volts. 60 watts. 12 x 9.45 x 28.four inches. 17 pounds. Limited 1-year warranty.
This Evaporative Air Cooler, Humidifier, and Fan is versatile, lightweight and economical. The Cooler conveniently rolls from area to area for use anyplace in your house or workplace. This Air Cooler shoots a stream of air with oscillating louvers, to evenly distribute refreshing cool air. Can also be applied as a fan or humidifier if temperature is not an concern. - plus get the air cleaning benefits of the ionic air purifier. The remote control allows you to very easily adjust settings. The Air Cooler works by endothermic reaction (a reaction that consumes heat), so this evaporative Air Cooler sucks air by means of a wick saturated with water. As the air flows by way of the wick, some of the water evaporates into the air, consuming the heat that was in the air. An air stream is then blown out the front of the unit and is considerably cooler than the existing area temperature! This is not an air conditioner and for this reason utilizes significantly much less energy. The unit functions nicely in dry climates not very reliable in places with high humidity as the unit utilizes water to cool.

Product Ads from External Websites(What's this?)
Sponsored Content material
Page 1 of 1 (Commence Over)

See a challenge with these advertisements?Let us know
Advertise right here

Product Characteristics

Versatile lightweight air cooler can also be put to use as a fan or humidifier
Uses significantly less power than an air conditioner
120 volts 60 watts
Remote control included
12 x 9.45 x 28.four inches 17 pounds restricted 1-year warranty

Customer Evaluations

There are so a number of points wrong with this unit that I am surprised I've managed to bear in mind them all. Some other reviewers have touched base on them currently, but here are the particulars:
You put water and/or ice in the best of the unit you can't place water where the ice is and vice-versa. The location exactly where you pour water into is about 3x2 inches in size (yes, seriously!), though the area for ice is about 7x3 inches. You literally require a funnel or a tiny plastic tube to fill the unit up with water (see below). But it gets worse...
Simply the greatest flaw: the water/melted ice goes down a tube and literally into the casing of the unit! There is no water tank, or centralized hold for liquids. The complete bottom of the unit is the "tank", if you can even call it that.
The two cooling packs provided contain some sort of affordable coolant liquid inside of them -- they do cool very well, but here's the trouble: they're physically too massive. The cooling packs are dropped into the bottom of the casing (where the water is), suitable into the water. They do not mount inside anyplace.
The "door" for the cooling packs is as well smaller for my hand (and I have small hands), which makes removing the cooling packs impossible. It took me a decent five minutes making use of a pair of plastic pliers to grab a pack and eliminate it. The door is held shut with magnets, which is admittedly good. But the door empties ideal into the water "tank", which suggests you may well as nicely fill it up from the side and not the leading! What had been they thinking when they engineered this point?!
Water pump is a pump intended for aquariums. If you open up the back of the unit (which you have to do for water filter cleaning see below), you can peek inside and see really clearly printed on the pump "AQUARIUM PUMP". Most aquarium pumps I know are loud, not soft/quiet nor do they hum and for the reason that the pump is screw-mounted to the bottom of the unit (which is plastic), I am left thinking the entire unit need to vibrate heavily when powered on. This makes you question the production superior of this item.
Water refill line is recessed deep inside the unit due to how the plastic casing is molded it really is impossible to read, and it's incredibly crucial (see above) to not go above a certain fill line. If you go above the line, water will commence to come out of the front of the unit, and the rear of the unit (bottom of where the air filter starts).
The air/lint filter on the back is quickly removable. Having said that, to clean the water filter, you will have to eliminate 6 screws and proceed to wiggle/wobble plastic pieces until you pull the back of the unit out. Why screws? Why not some retention plastic, or a clip? Far better but, why not magnets like the ones applied on the coolant door? You cannot remove it entirely, mainly because attached to it (permanently) is a brilliant orange hose connected somewhere inside the unit it has no slack. You need to have three-4 hands to do this job.
The water filter itself is what looks to be nylon webbing, identical to what some folks use in a clothes hamper. It really is just some cheap mesh with some Velcro on it so you can remove it semi-readily.
Manual states you need to clean the water filter each and every 2 weeks. Yup, you get to disassemble the unit that frequently. Enjoyable for the entire family?
A lot to my amusement, the drainage spout (if you need to have to drain the unit) is straight behind exactly where the AC power cord is. Am I the only one particular who thinks this is a bad idea?
Ought to you stay clear of this item? Definitely. I am left wishing I could give this issue unfavorable stars seriously, SPT ought to be ashamed for engineering a thing like this. I understand it really is somewhat cheap, but what you get for below a hundred US dollars is not even worth it.

Even living someplace where it is extremely low humidity (frequently less than ten%) it does not cool sufficient to make it worth the noise. The noise basically kept me up at night. Get a normal fan instead - it will operate better in the long run.